Canpol babies Electric Steam Sterilizer
Symbol: 77/052
Canpol babies Electric Steam Sterilizer
Symbol: 77/052The electric steam sterilizer allows you to quickly and conveniently disinfect baby feeding and care accessories. At the same time, it can hold 5-6 bottles and other small accessories. Disinfection takes up to 8 minutes and uses only 75ml of water for the whole process. The sterilizer is simple and intuitive to use, operated with one button. It is safe, it switches off automatically when the disinfection is finished. It has a specially designed filter container, which facilitates the removal of water and dirt after the disinfection process. No additional chemicals are required. The sterilizer is equipped with pliers which enable the removal of hot elements.
-
Product free of Bisphenol A
Quick - disinfecting in max. 8 minutes.
Capacious - can hold up to 6 bottles with accessories.
Economical - uses only 75 ml of water.
Safe - does not require the use of chemicals during sterilization, it switches off automatically.
Simple and intuitive - operation with one button.
The sterilizer is equipped with pliers for removing hot parts.
When the process is completed, the sterilizer will switch off automatically. You will hear a beep to indicate the end of the process and the control LED will go out. Store the device in a box or in a clean, dry place. Never hide the sterilizer when it is dirty or wet and do not wrap the power cord around the device. Use boiled water for disinfection to minimize scale build-up on the device. Do not use softened water in the sterilizer.
Important! Under no circumstances use any other means than citric acid or vinegar to remove scale, as this may cause irreparable damage to the product. Do not use any corrosive substances or chemicals to clean the product. Do not use bleach or chemical disinfectant solutions/tubes in the sterilizer or for products to be disinfected in it.
Before using for the first time, clean the inside of the sterilizer and its components and wipe it with a dry cloth. Important! Do not immerse the sterilizer body in water! Perform the first sterilization "empty" to disinfect its interior. Pour 75ml water onto the hob. Place the base basket on the construction stem, and then the bottle stabilizer so that the necks of these elements touch each other. When placing items to be disinfected, make sure that the steam can circulate effectively over all surfaces and that condensed water can easily drain into the filter container.
Place the bottles upside down on the structure, placing them through the bottle stabilizer and placing the base on the tabs of the basket.Then put and lock the basket on the shaft, and then put all the accessories in it. Place such a complex structure in the sterilizer's body and put the lid on.
Connect the device to the power socket and press the power switch. Do not lift the cover during operation. After the end of the sterilizer will switch off automatically.
To remove disinfected elements, wait for the sterilizer to cool down. It should cool down for min. 3 minutes. Unplug the power cord and remove the cover. The contents of the sterilizer will remain sterile up to 6 hours after the end of the process, provided that the lid is not removed. Removed components should be used / assembled as soon as the process is complete or sterilized again. After using the device and removing the elements, unfasten the filter container protection, remove the filter container, pour out the water left after disinfection and rinse the container. Finally, wipe the inside of the body and container with a cloth to prevent limescale or deposits. Important! You can use the sterilizer again after about 1 hour from the last disinfection.
Remove the stone from the sterilizer every four weeks to ensure its effective operation. Descaling may be performed using a solution of citric acid or vinegar.
